Processing and Sup Engines |
|||
|
|||
| 15 of 46 products |
Cisco C7200-I/O
P/N: C7200-I/O
Cisco 7200 Series Input/Output Controller C7200-I/O Functions and features: An auxiliary port A console port Environmental monitoring (voltage monitoring and temperature sensing) Fixed Flash memory for storage of boot-helper image Two PCMCIA Flash memory...
Cisco C7200-I/O-FE 7200 I/O FE Controller
P/N: C7200-I/O-FE
C7200-I/O-FE1 offers one Fast Ethernet port; equipped with an MII receptacle and an RJ-45 receptacle for use at 100 Mbps full-duplex or half-duplex operation. Only one receptacle can be configured for use at a time. C7200-I/O-FE1 Key Features Hardware and Sof...
Cisco C7200-I/O-GE+E Cisco 7200 Series Input/Output Controllers
P/N: C7200-I/O-GE+E
1-Port Gigabit Ethernet and 1-Port Ethernet Input/Output Controller C7200-I/O-GE+E Cisco 7200 series routers offer a choice of four input/output (I/O) controllers. In addition to the base functionality of all the Cisco 7200 series I/O controllers, the Cisco...
Cisco NPE G2 Cisco 7200VXR Series Network Processing Engine
P/N: Cisco NPE-G2
Cisco 7200VXR Series NPE-G2 Network Processing Engine Overvie NPE-G2 Provides double the performance compared to the Cisco 7200 VXR NPE-G1-up to 2 million packets per second (pps) in Cisco Express Forwarding Offers three 10/100/1000-Mbps copper Ethernet ports a...
Nortel DS1402002 8006 6 slot chassis
P/N: DS1402002
The Nortel DS1402002 8006 Chassis provides four slots for installing I/O modules and two slots for installing either 8190SM Switch Management Modules or 8691SF Switch Fabric Modules. Slots are numbered from the top down. The top four slots allow you to install either...
Cisco NPE-225 Network Processing Engine
P/N: NPE-225
NPE-225 Network Processing Engine NPE-225 (128MB default memory) The NPE-225 network processing engine has a higher sustained throughput rate, offering higher performance for a lower price. The NPE-225 uses a high-performance 263 MHz RM5271 RISC processor, com...
Cisco NPE-300 Processing Engine
P/N: NPE-300
Cisco Network Processing Engine NPE-300 - Control processor General Device Type Control processor Localization English Processor / Memory / Storage Processors Installed 1 x RM7000 262 MHz RISC Max Supported Qty 1 RAM Installed...
Cisco 7200 Series Network Processing Engine NPE-400
P/N: NPE-400
NPE-400 Cisco 7200VXR Network Processing Engine NPE-400, including 256 MB SDRAM Chassis The NPE-400 is supported on the Cisco 7200 Series VXR chassis. I/O Controllers The NPE-400 is supported on the following Cisco 7200 Series I/O controllers: C7200-I/O C7...
Cisco PRP-1 12000 Series Performance Route Processor-1
P/N: PRP-1
Cisco 12000 Series Performance Router Processor-1, 512 MB SDRAM, 64 MB Boot Flash, 64 MB Flash disk PRP-1 The Cisco PRP-1 has the memory capacity to support more than 1 million routes, providing extensive headroom to address the largest public and private appl...
Cisco Route Switch Processor RSP16
P/N: RSP16
The Route Switch Processor 16 RSP16 is a high performance system processor for the Cisco 7500 Series Router. The RSP16 supports up to 1 GB of program memory enhancing routing tables. The RSP16 performance increases switching performance by 20 percent and 55 percent c...
Cisco RSP4 Route Switch Processor
P/N: RSP4
Cisco RSP4 engines available here at RICOM, Inc. The (RSP4) is the main system processor for the Cisco 7500 Series Router. The RSP4 combines all of the routing and high-speed switching functions for the Cisco 7500 series router. In addition to running the system sof...
Cisco RSP4+ Route Switch Processor
P/N: RSP4+
The Route Switch Processor 4 RSP4+ is the main system processor for the Cisco 7500 Series Router. The RSP4+ combines all of the routing and high-speed switching functions for the Cisco 7500 series router. In addition to running the system software, the RSP4+ contains...
Cisco RSP8 7500 Routers Route Switch Processor
P/N: RSP8
Route Switch Processor 8 RSP8 The Route Switch Processor 8 RSP8 is Cisco Systems' newest-generation main system processor for the Cisco 7500 Series Router. The RSP8 significantly increases system performance for the Cisco 7500 with a new high-performance 250 ...
Cisco uBR7200-NPE-G1 Network Processing Engine
P/N: uBR7200-NPE-G1
The Cisco 7200 Series Network Processing Engine NPE-G1 (NPE-G1) offers increased performance by doubling the processing capacity and LAN performance. The Cisco NPE-G1 supports three types of GBICs: SX, LX/LH, and ZX.Cisco uBR7200-NPE-G1 Specifications Provides per...
Cisco uBR7200-NPE-G2 Network Processing Engine
P/N: uBR7200-NPE-G2
The Cisco uBR7200-NPE-G2 Network Processing Engine offers performance of up to 1.3 Million Packets per Second (Mpps) in Cisco Express Forwarding Switching. An I/O controller can be used with the NPE-G2, but an I/O controller is not necessary for system functionality....
 |
|
Order online or by phone 1-800-997-8008 |
Shopping Cart (0 items) | Have an account? Sign in |
| 15 of 46 products |
RICOM Inc's online store
